Detailed fleet management
- Control individual karts, groups or the entire fleet
- Add, remove and group karts freely
- Configure beacons and zone speed limits
KART TRACK SAFETY SYSTEM
Remote kart speed control
Reshape track management for safer, more efficient and smarter operations.
CYBER FIREBIRD / KART SAFETY SYSTEMS
CONTROL EVERY MOMENT
What we can do
One-touch track control
- Physical remote controls respond faster than the app in emergencies
- Intervene in all kart speeds with one command
- Independent radio networking avoids internet dependence
Automatic speed limits
- Automatic PIT speed limiting
- Smooth, efficient operation helps reduce PIT-entry accident risk
ONE CONNECTED SYSTEM
One system. Control every kart on your track.
- Remotely control speed or stop one kart, a group or the entire fleet
- Automatically limit the speed of every kart entering the pit area
BUILT FOR THE TRACK
System Hardware
For petrol and electric kart fleets. Choose a hardware setup to suit your track, vehicles and operating procedures.
Track-wide communication hub
LoRa Gateway Base Station
Coordinates communication and data exchange across the entire system.
- Effective range: 300 m
- Industrial design with IP65 protection for demanding environments
- Separate transmit and receive radio channels reduce interference
- Automatic Ethernet / 4G switching when the wired connection drops
- Open interface for timing-system integration
Petrol karts
CDI Kart Controller
Designed for petrol karts. Adjusts ignition pulses to limit engine speed.
- Supports multiple engine brands, including Honda GX series
- Five speed settings plus engine shutdown
- Compatible with the LoRa gateway and induction module
- Built-in battery, low power consumption and reverse charging
- Built-in omnidirectional antenna for stable, wide-area coverage
Electric karts
EV Kart Controller
Designed for electric karts and developed in collaboration with kart manufacturers.
- Speed settings depend on the kart manufacturer
- Battery, motor and controller temperatures plus battery level
- Fault alerts
- Shows active, offline and stopped karts
- Automotive-grade connectors
- Compatible with the LoRa gateway and induction module
Driver information display
Steering Wheel Display
Designed for electric karts, bringing vehicle status and track information directly to the driver.
- Motor RPM and speed display
- Position, best lap and current lap with timing-system integration
- Battery level, speed setting and flag signals
- BOOST progress bar and integrated controls
Onboard zone detection
Induction Module
An add-on for all kart controllers. Works with the track beacon to enable zone-based management.
- Powered and connected through the controller; no separate battery
- Works with the track beacon for PIT entry deceleration and PIT exit acceleration
- Speed limits for hazardous zones
- Set a custom speed level for each kart after crossing a detection loop
Automatic zone speed limits
Track Beacon
An optional extension for automatic PIT-entry speed limits and dividing the track into controlled zones.
- Includes a 30 m loop cable
- User-configurable zones and speed limits
- Use the app or remote to limit or stop karts entering a specific zone
- Works with the induction module for PIT entry deceleration and PIT exit acceleration
Fast manual intervention
Remote Control
An additional emergency control tool. Physical controls respond faster than the app, using an independent radio network.
- One-touch speed control for all karts
- Switch two track beacons on or off
- Quick response to incidents
- Independent radio network; no internet connection required
- Stable signal and rapid emergency commands
RELIABLE BY DESIGN
Reliability & Safety
Every moment matters when safety is at stake.
- Smooth deceleration
- Gradual speed reduction avoids abrupt braking that could cause rear-end collisions.
- Fail-safe design
- Independent power and low consumption. Karts can continue operating if the device itself fails.
- Rapid response
- The remote uses an independent radio network for millisecond emergency-command response.
- Stable, interference-resistant links
- Separate LoRa transmit and receive channels offer strong penetration and interference resistance.
Installation & Compatibility
Easy to install. Ready to run.
- Quick installation
- Install in 10 minutes per kart, without cutting wires or interrupting operations.
- Non-invasive installation
- Preserves the original engine structure, vehicle warranty and performance.
- Flexible integration
- Open interfaces make it easy to integrate with timing systems.
Kart track safety: common questions
Which karts does the system support?
The CDI controller limits petrol engine speed by adjusting ignition pulses. The EV controller is designed for electric karts, with speed settings depending on the kart manufacturer. Confirm the kart model and interfaces before selecting equipment.
Can I control a single kart?
You can remotely control speed or stop one kart, a group or the entire fleet, and add, remove and group karts.
How does automatic PIT speed limiting work?
The track beacon and onboard induction module work together for PIT-entry deceleration and PIT-exit acceleration. They also support speed limits in hazardous zones.
How can I get a configuration and quote?
Share your track layout, fleet configuration and management requirements. Contact [email protected] or +86 187 6312 2673 for a tailored equipment configuration and quotation.
Not sure what your track needs?
Every track has a different layout, fleet and operating model. Tell us about your circuit and management needs. We will design a suitable safety system, provide a clear equipment plan and quotation, and support you from planning through installation.
Get a Tailored Solution